He2022 giảm giá 150k cho vé bay đôi dù lượn tại

watermark logo

Tiếp theo

Building a toolbox from reclaimed materials - BANDARRA

22 Lượt xem· 05/08/22
0 Người đăng ký

My hand tools have been all over the place for a while and I had some reclaimed plywood and other parts kind of in the way so I thought I would put it all together in the shape of a toolbox or tool chest.

I started by measuring and adjusting the drawer sliders so that they were all the same length. Then based on that and the plywood I had I made a quick CAD model to define the look and dimensions and also to make sure I had enough wood.

Then I cut all the pieces to size and glue them together with rabbets and dadoes. It's really nice to work with good quality plywood :)

Then I fitted the drawer slides and this was the trickiest part. They didn't come out perfect but was good enough for my first try.

I finished by doing some drawer faces out of reclaimed flooring and put down stickers from all the makers I met at Makers Central back in May.

Now I'm one step closer to having a somewhat tidier workshop :)

Support my work on Patreon

Thank you to these fine people on Patreon!
Thibaut Ferreira, Maria Sousa, Lee Cooper, Gemma Briggs, M_House, Boris Kopeykin, Pedro Luzuriaga, Alexandre Castro, Pierre Delisle, Jeroen Geerdink, Allen Thoe, Cloudbase Mayhem, Pieter Penning, Gregory Sadowy, Brent Bumgardner, Nicolas Raynaud, The Adventure Report, Daniel Menet, Lorron Wilson.



== Gear I use for these videos ==
(support me by using the amazon links at no extra cost to you)

Panasonic G80

Panasonic 12-60mm f3.5 lens

Panasonic 45-200mm f4.0 lens

Manfrotto 190Go tripod

Mandrotto fluid head MVH500AH

Rode VideoMicro

DJI Osmo X3

DJI Osmo extra Battery

SanDisk Extreme 64Gb micro Sd card

Windshield for Rode VideoMicro

Smallrig Ballhead Arm V4

Osmo Remote Extension

Movo PM10 lavalier mic

Cho xem nhiều hơn

 0 Bình luận sort   Sắp xếp theo

Tiếp theo